Klipsch ON-EAR BLUETOOTH - Getting Started; Turning off; Charging

GETTING
STARTED
1.
Turn
on
the
headset
by
pressing
the
Power/Pair
button
for
2
sec-
onds.
The
headset
will
automatically
go
to
pairing
mode
and
the
status
indicator
will
begin
pulsing
BLUE.
2.
Connect
to
"Kiipsch
Over-Ear
BT"
from
your
device.
3.
Once
connected,
the
headset
will
periodically
blink
BLUE.
Note:
The
headset
will
automatically
pair
to
the
last
device
connected
to
it
when
turned
on.
TURNING
OFF
Press
the
Power/Pair
button
for
5
seconds
to
turn
the
headset
off.
CHARGING
Use
the
included
Micro-USB
cable
to
charge
the
headset
from
your
computer
or
USB
wall
adapter
(not
included).
The
status
indicator
will
glow
RED
until
the
headset
is
charged,
at
which
point
it
will
turn
off.