Need help?Do you have a question about the Klipsch R-110SW and is the answer not in the manual?
Inspect new speaker system for transit damage and verify components against packing list.
Connect using receiver's Subwoofer Pre Out, Sub Out, or Left/Right Pre-Amp Outputs.
Optional wireless connectivity for select Klipsch subwoofers using the WA-2 transmitter.
Adjust subwoofer volume to match main speakers, using receiver or subwoofer gain control.
Set crossover point to blend subwoofer bass with main speakers based on speaker size.
Adjust phase (0°/180°) to acoustically match subwoofer output with main speakers.
Configure power modes for automatic turn-on/standby or manual off operation.
LED indicates amplifier status: green for on/signal, dark for off.
Inspect new speaker system for transit damage and verify components against packing list.
Connect using receiver's Subwoofer Pre Out, Sub Out, or Left/Right Pre-Amp Outputs.
Optional wireless connectivity for select Klipsch subwoofers using the WA-2 transmitter.
Adjust subwoofer volume to match main speakers, using receiver or subwoofer gain control.
Set crossover point to blend subwoofer bass with main speakers based on speaker size.
Adjust phase (0°/180°) to acoustically match subwoofer output with main speakers.
Configure power modes for automatic turn-on/standby or manual off operation.
LED indicates amplifier status: green for on/signal, dark for off.
General| Subwoofer type | - |
|---|---|
| Subwoofer peak power | 450 W |
| Subwoofer driver diameter | 254 mm |
| Subwoofer frequency range | 27 - 125 Hz |
| Subwoofer driver diameter (imperial) | 10 \ |
| Material | MDF |
| Bass reflex | Yes |
| Product color | Black |
Weight and Dimensions| Subwoofer depth | 401.3 mm |
|---|---|
| Subwoofer width | 373.7 mm |
| Subwoofer height | 414 mm |
| Subwoofer weight | 17800 g |
To Next Page