Klipsch R-14M User Manual

Service Manual – Consumer
15
Next, plug the wires on to the new woofer, and slide
the silicone covers back over the terminals.
Place the woofer back into position, and replace the
screws.
Replace the trim ring by setting into position and gently
pressing the trim ring around the edge, verifying the
clips on the back are locking into place. Once this is
done, the trim ring should sit flush with the front of
the speaker

Klipsch R-14M Specifications

General

Bass reflex	Yes
Product color	Black
Housing material	MDF
Recommended usage	Universal
Suitable for outdoor use	-
Speaker type	5-way
Woofer diameter	102 mm
Tweeter diameter	25.4 mm
Number of drivers	2
Speaker placement	Floor, Tabletop/bookshelf
Audio output channels	2.0 channels
Number of tweeter drivers	1
Woofer diameter (imperial)	4 \
Tweeter diameter (imperial)	1 \
Impedance	8 Ω
Sensitivity	90 dB
Frequency range	64 - 24000 Hz
RMS rated power	50 W
Crossover frequency	2250 Hz
Peak Music Power Output (PMPO)	200 W
Package weight	7160 g
Connectivity technology	Wired

Weight and Dimensions

Depth	191 mm
Width	149 mm
Height	248 mm
Weight	6400 g