Klipsch R-5650-W User Manual

R-5650-W
Sophisticated, yet uncomplicated, the
Klipsch R-5650-W in-wall loudspeaker will
forever change the way you view or listen to
architectural audio. Whether used for home
theater or stereo music applications, this
high-quality and installer
-friendly model
challenges the performance of comparable
stand alone speakers.
By featuring a 6.5-inch Cerametallic™
woofer cone, 1-inch titanium tweeter mated
to a pivoting Tractrix® Horn, as well as
treble and bass contour switches, there’s no
denying this speaker’s natural precision,
clarity and efficiency.
Available in a white finish, the R-5650-W can
be paired with one of Klipsch’s new
installation kits (sold separately). Each of
these revolutionary kit designs allow for
increased mounting flexibility and
incorporate a mud ring, wire tie and
universal metal mesh wing for multi-position
placement and a color-coded bracket for
easy speaker size identification.
6.5" Two-Way In-Wall Loudspeaker
SPECIFICATIONS
FREQUENCY RESPONSE 52Hz-20kHz ± 3dB
SENSITIVITY 93dB @ 1 watt/1 meter
NOMINAL IMPEDANCE 8 ohms
CROSSOVER FREQUENCY 2500Hz
POWER HANDLING 50 watts (200 watts peak)
ENCLOSURE MATERIAL/TYPE ABS/ Infinite baffle, front flush with wall
DRIVE COMPONENTS Two-way system using one 1" (2.54cm)
Titanium dome compression tweeter with a
6" (15.24cm) square 90˚x 60˚pivoting
Tractrix
®
Horn and one 6.5" (16.51cm)
aluminum cone woofer
WIRE GAUGE ACCOMMODATED 12
WEIGHT 7.2 lbs. (3.25kg)
HEIGHT 14.3" (36.32cm)
WIDTH 9.3" (23.62cm)
MOUNTING DEPTH 3.75" (9.5cm)
CUTOUT DIMENSIONS 13" (33.02cm) x 8" (20.32cm)
FINISH White
INSTALLATION KIT IK-650-W (sold serparately)
■
Very high sensitivity and power handling
■
Pivoting Tractrix Horn compression driver tweeter for clear sound in
any location
■
Treble and midbass attenuation switches and IR receiver knock out
■
Single piece grille frame and rustproof aluminum grille
www
.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004

Klipsch R-5650-W Specifications

General

Type	In-wall speaker
Nominal Impedance	8 Ohms
Crossover Frequency	2.0 kHz
Cutout Dimensions	9.5 x 14.5 inches
Weight	5.5 lbs
Color	White
Sensitivity	94dB
High Frequency Driver	1 inch (25 mm) Titanium LTS vented tweeter
Low Frequency Driver	6.5"
Finish	White
Power Handling RMS	50W
Power Handling Peak	200W

Summary

Klipsch R-5650-W In-Wall Loudspeaker Overview

Key Features

High sensitivity, pivoting Tractrix Horn, treble/midbass attenuation switches, IR receiver knockout, single piece grille.

Product Specifications

Frequency Response

Specifies the audible frequency range the speaker can reproduce, measured in Hz with a tolerance.

Sensitivity

Indicates how efficiently the speaker converts amplifier power into sound output, measured in dB.

Nominal Impedance

The electrical resistance of the speaker, typically measured in ohms, affecting amplifier compatibility.

Crossover Frequency

The frequency at which the audio signal is divided between the speaker drivers (tweeter and woofer).

Power Handling

The continuous and peak power (in watts) the speaker can safely handle from an amplifier.

Enclosure Material/Type

Details the speaker's cabinet construction and mounting type, such as ABS infinite baffle, front flush.

Drive Components

Lists the specific drivers used, including tweeter type, horn, and woofer size and material.

Wire Gauge Accommodated

Specifies the maximum wire gauge (in AWG) suitable for speaker connections.

Dimensions and Mounting

Includes weight, height, width, mounting depth, and cutout dimensions for installation.

Finish and Installation Kit

Notes the speaker's exterior finish (e.g., White) and compatible installation kit model.