Need help?Do you have a question about the Klipsch R-50M and is the answer not in the manual?
General| Tweeter | Yes |
|---|---|
| Speaker type | 2-way |
| Number of drivers | 1 |
| Speaker placement | Tabletop/bookshelf |
| Audio output channels | 2.0 channels |
| Woofer diameter (imperial) | 5.25 \ |
| Tweeter diameter (imperial) | 1 \ |
| Impedance | 8 Ω |
| Sensitivity | 92 dB |
| Frequency range | 58 - 2100 Hz |
| RMS rated power | 300 W |
| Crossover frequency | 1560 Hz |
| Peak Music Power Output (PMPO) | 75 W |
| Product color | Black |
| Housing material | MDF, Wood |
| Recommended usage | Home |
| Connectivity technology | Wired |
| Quantity per pack | 2 pc(s) |
Weight and Dimensions| Depth | 229 mm |
|---|---|
| Width | 178 mm |
| Height | 354 mm |
| Weight | 5000 g |
Some Klipsch® speakers have feet and other accessories that may need to be installed prior to use.
For optimum performance, Klipsch suggests placing speakers 6-15 feet apart. Listening position should be 1-1.5 times speaker distance.
Designed to place dialogue near the video screen. Place as close to the screen as possible, on top or below.
Place approximately 2 feet above listening position, 5-7 feet above floor. On adjacent or rear wall for ambient sound.
Connect RED (+) to RED (+) and BLACK (-) to BLACK (-) terminals for speaker and amplifier channels.
Highly efficient 8-ohm speakers work with various amps. Use caution with volume to prevent hearing damage or equipment overload.
Diagram showing optimal placement angles and positions for Dolby Atmos speaker configurations.
To Next Page
