Klipsch R-5800-W User Manual

R-5800-W
Creating a new benchmark in architectural
audio excellence, the installer-friendly
Klipsch R-5800-W in-wall loudspeaker
delivers a level of realism and subtlety that
surpasses and even intimidates competing
designs.
By featuring an 8-inch Cerametallic™
woofer cone, 1-inch titanium tweeter mated
to a pivoting Tractrix® Horn, as well as
treble and bass contour switches, there’s no
denying this speaker’s natural precision,
clarity and efficiency.
Available in a white finish, the R-5800-W can
be paired with one of Klipsch’s new
installation kits (sold separately). Each of
these revolutionary kit designs allow for
increased mounting flexibility and
incorporate a mud ring, wire tie and
universal metal mesh wing for multi-position
placement and a color-coded bracket for
easy speaker size identification.
8" Two-Way In-Wall Loudspeaker
SPECIFICATIONS
FREQUENCY RESPONSE 40Hz-20kHz ± 3dB
SENSITIVITY 94dB @ 1 watt/1 meter
NOMINAL IMPEDANCE 8 ohms
CROSSOVER FREQUENCY 2600Hz
POWER HANDLING 50 watts (200 watts peak)
ENCLOSURE MATERIAL/TYPE ABS/ Infinite baffle, front flush with wall
DRIVE COMPONENTS Two-way system using one 1" (2.54cm)
titanium dome compression tweeter with a 6"
(15.24cm) square 90° x 60° pivoting
Tractrix
®
Horn and one 8" (20.32cm)
aluminum cone woofer
WIRE GAUGE ACCOMMODATED 12
WEIGHT 7.9 lbs. (3.6kg)
HEIGHT 16.1" (40.89cm)
WIDTH 10.6" (26.92cm)
MOUNTING DEPTH 3.75" (9.5cm)
CUTOUT DIMENSIONS 14.75" (37.47cm) x 9.25" (23.50cm)
FINISH White
INSTALLATION KIT IK-800-W (sold separately)
■
Very high sensitivity and power handling
■
Pivoting Tractrix Horn compression driver tweeter for clear sound in
any location
■
Treble and midbass attenuation switches and IR receiver knock out
■
Single piece grille frame and rustproof aluminum grille
www
.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004

Klipsch R-5800-W Specifications

General

Type	In-wall/On-wall/In-ceiling speakers
Depth (imperial)	3.75 \
Width (imperial)	10.6 \
Height (imperial)	16.1 \
Woofer diameter	203.2 mm
Tweeter diameter	25.4 mm
Audio output channels	1.0 channels
Tweeter diameter (imperial)	1 \
Mid-range driver diameter (imperial)	8 \
Impedance	8 Ω
Sensitivity	94 dB
Frequency range	40 - 20000 Hz
RMS rated power	50 W
Crossover frequency	2600 Hz
Peak Music Power Output (PMPO)	200 W

Weight and Dimensions

Depth	95 mm
Width	269.2 mm
Height	408.9 mm
Weight	3.6 g

Summary

8" Two-Way In-Wall Loudspeaker

Product Description

Overview of the R-5800-W's architectural audio excellence, realism, subtlety, and performance.

Key Features

Highlights include 8-inch Cerametallic woofer, pivoting Tractrix Horn tweeter, and contour switches.

Installation Options

Available in white finish, compatible with Klipsch installation kits for flexible mounting.

Specifications

Frequency Response

Details the audible frequency range of the loudspeaker system.

Sensitivity

Measures the loudspeaker's efficiency in converting power to sound.

Nominal Impedance

Specifies the electrical resistance of the loudspeaker.

Crossover Frequency

Indicates the frequency point where audio signals are divided.

Power Handling

Defines the continuous and peak power the loudspeaker can manage.

Enclosure Material/Type

Describes the construction and mounting type of the loudspeaker enclosure.

Drive Components

Details the tweeter and woofer drivers used in the two-way system.

Wire Gauge Accommodated

Specifies the range of speaker wire gauges supported for connection.

Weight

Provides the physical weight of the loudspeaker.

Height

Indicates the vertical dimension of the loudspeaker.

Width

Indicates the horizontal dimension of the loudspeaker.

Mounting Depth

Specifies the depth required for in-wall installation.

Cutout Dimensions

Provides the required dimensions for cutting the opening in the wall.

Finish

States the available color or surface treatment of the loudspeaker.

Installation Kit

Identifies the compatible installation kit for the loudspeaker.