Klipsch R-2502-W User Manual

www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2008
In-Wall Loudspeaker
R-2502-W
frequency response 47Hz-20kHz +/-3dB
power handling 60W continuous / 240W peak
recommended amplifier power 110W
sensitivity 91dB @ 2.83V / 1m
nominal impedance 8 ohms compatible
high frequency drivers 1” (2.5cm) Silk dome tweeter
high freq crossover 2200Hz
low frequency drivers Dual 5.25” (13.3cm) polypropylene
cone woofers
enclosure material ABS
enclosure type Infinite baffle, front flush with wall
dimensions 17.75” (45.1cm) H x
8” (20.3cm) W
mounting depth 3.5” (8.9cm)
cutout dimensions 16.5” (41.9cm) H x 6.5”
(16.5cm) W
installation kit IK-502-W (sold seperately)
weight 6.25lbs (2.8kg)
finishes White paintable frame and grille
SpecificationS
The R-2502-W employs dual 5.25-inch
polymer woofer cones for accurate sound
with dynamic detail, while a silk dome
tweeter mated to a symmetrical pattern
90 x 90 conical horn generates flat in-room
frequency response with high efficiency and
low distortion. The speaker’s precision-
voiced crossover networks further ensure
that the high and low frequencies are
faithfully reproduced.
This in-wall speaker also consistently
delivers thrilling, realistic sound, whether
it’s installed horizontally or vertically. It fea-
tures all-new sure-grip mounting dogs that
provide even pressure against drywall for
long-term installation reliability, and includes
a paintable grille that blends in perfectly with
any décor. IR receiver knockout holes allow
for infrared repeaters, bringing custom
configuration to installers.
Furthermore, the R-2502-W offers unlimited
flexibility. It is timbre matched to all of our
2000 series architectural products, so you
can mix and match to create an affordable,
discreet stereo or home theater system
that’s just right for you.
• Perfect for left, center or right channel use
• Easily mounts horizontally or vertically
• Horn-loaded for high efciency and low distortion
• IR receiver knockouts
• Maximum installation reliability
• Mix and match with our 2000 series products

Klipsch R-2502-W Specifications

General

Brand	Klipsch
Model	R-2502-W
Category	Speakers
Language	English

Summary

R-2502-W In-Wall Loudspeaker Overview

Key Features

Highlights include flexible mounting, horn-loaded design for efficiency, IR receiver knockouts, and compatibility with 2000 series products.

Product Specifications

Frequency Response

The speaker offers a frequency response of 47Hz-20kHz +/-3dB.

Power Handling

Handles 60W continuous and 240W peak power.

Recommended Amplifier Power

Suitable for amplifiers up to 110W.

Sensitivity

Sensitivity is rated at 91dB @ 2.83V/1m.

Nominal Impedance

Features an 8 ohms compatible nominal impedance.

High Frequency Driver

Equipped with a 1" (2.5cm) Silk dome tweeter.

High Frequency Crossover

The crossover point for high frequencies is set at 2200Hz.

Low Frequency Drivers

Features dual 5.25" (13.3cm) polypropylene cone woofers.

Enclosure Material

Constructed with ABS material for the enclosure.

Enclosure Type

Utilizes an infinite baffle, front flush with wall enclosure.

Dimensions

Measures 17.75" (45.1cm) H x 8" (20.3cm) W.

Mounting Depth

Requires a mounting depth of 3.5" (8.9cm).

Cutout Dimensions

Cutout dimensions are 16.5" (41.9cm) H x 6.5" (16.5cm) W.

Installation Kit

Requires the IK-502-W installation kit (sold separately).

Weight

The speaker weighs 6.25lbs (2.8kg).

Finishes

Available with a white paintable frame and grille.