Klipsch R-28F Service Manual

Service Manual – Consumer
16
Next, plug the wires on to the new tweeter, and slide
the silicone covers back over the terminals.
Place the tweeter back into position, and replace the
screws.
Replace the trim ring by setting into position and gently
pressing the trim ring around the edge, verifying the
clips on the back are locking into place. Once this is
done, the trim ring should sit flush with the front of
the speaker

Klipsch R-28F Specifications

General

Bass reflex	Yes
Product color	Black
Housing material	MDF, Polymer
Recommended usage	Universal
Suitable for outdoor use	-
Speaker type	5-way
Woofer diameter	203 mm
Tweeter diameter	25.4 mm
Number of drivers	3
Speaker placement	Floor
Audio output channels	1.0 channels
Number of woofer drivers	2
Driver diaphragm material	Aluminum
Number of tweeter drivers	1
Woofer diameter (imperial)	8 \
Tweeter diameter (imperial)	1 \
Cable length	1 m
Impedance	8 Ω
Sensitivity	98 dB
Frequency range	35 - 2400 Hz
RMS rated power	150 W
Crossover frequency	1800 Hz
Peak Music Power Output (PMPO)	600 W
Connectivity technology	Wired

Weight and Dimensions

Depth	398 mm
Width	241 mm
Height	1066 mm
Weight	25680 g