Klipsch RC-64 User Manual

RC-64
SPECIFICATIONS
FREQUENCY RESPONSE 62Hz-21kHz ± 3dB
POWER HANDLING 200W RMS / 800W Peak
SENSITIVITY 99dB @ 2.83V / 1m
NOMINAL IMPEDANCE 8 ohms compatible
HIGH FREQUENCY DRIVERS 1.25" (3.2cm) Titanium diaphragm
compression driver mated to 90˚x 60˚
square Tractrix
®
Horn
HIGH FREQUENCY CROSSOVER 1150Hz, 1800Hz
LOW FREQUENCY DRIVERS Quad 6.5" (16.5cm) High-output
Cerametallic
™
cone woofers
ENCLOSURE TYPE Sealed
HEIGHT
8" (20.3cm)
WIDTH 33" (83.8cm)
DEPTH 13.5" (34.3cm)
MOUNTING Uptilt and Downtilt feet
WEIGHT 61 lbs (27.7kg)
FINISH Cherry or Black Ash wood veneer
Quad 6.5" Center Channel Loudspeaker
Designed to be one of the most unique and
powerful center channels on the market, the
RC-64 is certainly a force to be reckoned with.
Exclusive Tractrix
®
Horns have always been the
key component of this critically acclaimed series.
In the RC-64, this technology has been refined to
include improved throat geometry for a more
genuine, lifelike sound. Behind the horn lies a
professional-grade 1.25-inch titanium diaphragm
compression driver to provide a unique
combination of precision, clarity and effortless
power.
The RC-64 employs four 6.5-inch high-output
woofers for a solid bass foundation. These
Cerametallic
™
woofers with inverted copper dust
caps exhibit a very high stiffness-to-mass ratio
and superb damping characteristics.
Klipsch Tapered Array
™
technology operates all
of the woofers at the lowest frequencies –
maintaining the high output capability necessary
for good center channel performance – but only
two operate all the way through the midrange to
where the tweeter takes over. This eliminates
acoustic interference between the woofer
outputs, a flaw in conventional speaker designs
that can severely impair sound quality at the sides
of the listening area.
The RC-64’s sealed cabinet offers improved
internal cross-bracing to minimize panel vibrations
that can color sound. Increased baffle ribbing
around the horn mouth dramatically improves
acoustics across the sonic range. For signal purity
and perfect driver integration, the crossover on
the RC
-64 features the finest components and
Klipsch custom internal wiring. Bi-wire inputs with
premium binding posts ensure superior
connectivity
.
Available in either a cherry or black real wood
veneer finish, the fully video-shielded RC-64
comes with a knife-edge back and low-diffraction,
magnetically attached grille to further accentuate
the elegance of this speaker
.
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2006
• Ultra-high-performance center channel speaker
• Tapered Array
™
design for maximum dialogue clarity
• Magnetically shielded drivers to prevent video interference
• Furniture-grade wood veneer finish

Klipsch RC-64 Specifications

General

Sensitivity	99dB @ 2.83V / 1m
Power Handling	200W RMS / 800W Peak
Nominal Impedance	8 Ohms compatible
Enclosure Material	MDF
High Frequency Driver	1.75" (4.45cm) Titanium diaphragm compression driver
Low Frequency Driver	Four 6.5" Cerametallic cone woofers
Enclosure Type	Bass-reflex

Summary

Specifications

Frequency Response

Specifies the audible frequency range reproduced by the speaker, measured in Hz.

Power Handling

Details the speaker's continuous (RMS) and peak power capacity in Watts (W).

Sensitivity

Indicates the sound pressure level (SPL) output for a given input power, measured in dB.

Nominal Impedance

States the speaker's electrical impedance, measured in Ohms (Ω).

High Frequency Drivers

Describes the tweeter component, its size, material, and horn integration.

High Frequency Crossover

Specifies the crossover frequency for the high-frequency driver in Hz.

Low Frequency Drivers

Details the woofers, their size, quantity, and material composition.

Enclosure Type

Identifies the speaker cabinet as sealed.

Height

Provides the speaker's physical height dimension in inches and centimeters.

Width

Provides the speaker's physical width dimension in inches and centimeters.

Depth

Provides the speaker's physical depth dimension in inches and centimeters.

Mounting

Describes the adjustable feet for tilting the speaker.

Weight

Specifies the speaker's weight in pounds and kilograms.

Finish

Indicates the available real wood veneer finishes for the speaker.