Need help?Do you have a question about the Klipsch RC-62 and is the answer not in the manual?
General| Frequency Response | 57Hz - 24kHz ± 3dB |
|---|---|
| Power Handling | 150W RMS / 600W Peak |
| Nominal Impedance | 8 ohms compatible |
| Enclosure Type | Bass-reflex via rear-firing port |
| High Frequency Driver Horn | 90° x 60° Tractrix Horn |
| Tweeter | 1" (2.54cm) Titanium diaphragm compression driver |
| High Frequency Driver | 1" (2.54cm) Titanium diaphragm compression driver |
| Low Frequency Driver | Dual 6.5" Cerametallic cone woofers |
| Finish | Black Ash |
Instructions for removing all speaker models from packaging.
Guidance for unpacking and setting up floorstanding speakers.
Instructions for unpacking bookshelf, center, and surround models.
Guidelines for positioning front left and right speakers.
Placement recommendations for center channel speakers.
Placement recommendations for surround channel speakers.
How to make standard speaker wire connections.
Instructions for bi-wire speaker connections.
Guidance on bass management settings for home theater systems.
Instructions for cleaning and maintaining the speakers.
Warranty details for the USA and Canada.
Warranty terms for products sold outside the USA and Canada.
To Next Page
