Klipsch T5 Neckband User Manual

4
GETTING STARTED
TURNING OFF
CHARGING
Use the included Micro-USB cable to charge the headset from your computer
or USB wall adapter (not included). The status indicator will glow RED until the
headset is charged, at which point it will turn off.
Press the Power/Pair button for 5 seconds to turn the headset off.
1. You can mute the microphone by pressing and holding “Volume Up” and
“Volume Down“ simultaneously during a call.
2. You can access voice control by double pressing Play/Pause.
3. You can reject a second incoming call by pressing and holding Play/Pause.
Bluetooth
®
5.0
A2DP Codecs: SBC, aptX
®
Range: up to 10m (33 feet)
Input rating: 5V DC, 0.5A
ADDITIONAL FEATURES
SPECIFICATIONS
1. Turn on the headset by pressing the Power/Pair button for 5 seconds. The
headset will automatically go to pairing mode and the status indicator will
begin pulsing BLUE.
2. Connect to “Klipsch T5 Neckband” from your device.
3. Once connected, the headset will periodically blink BLUE.
Note: The headset will automatically pair to the last device connected to it
when turned on.

Klipsch T5 Neckband Specifications

General

Brand	Klipsch
Model	T5 Neckband
Category	Headphone
Language	English