klover ECOMPACT 190 - User Manual

ENGLISH
Pellet-burning
boiler ECOMPACT
150-190-250-290
INSTALLATION, USE, MAINTENANCE AND
HELPFUL TIPS
Main Revision 1.1
FPH_supplement: 001

Summary

INTRODUCTION

Important safety instructions

Crucial safety advice before installation and use.

Technical specifications ECOMPACT 150

Technical specifications ECOMPACT 190

Technical specifications ECOMPACT 250

Technical specifications ECOMPACT 290

REQUIREMENTS OF THE PLACE OF INSTALLATION

Positioning

Guidance on selecting an optimal location for appliance installation.

Spaces around and above the appliance

External air intake

Chimney and Flue pipe

ELECTRICAL CONNECTION

Control of any coupled boiler

Connection to the room thermostat

HYDRAULIC CONNECTION

THE MENU

INITIAL START-UP

System configuration

Setting up the appliance based on the heating system type.

Filling the system for the first time

Pellet loading and connection to the mains power supply

Ignition cycle

Detailed steps involved in starting the appliance's ignition sequence.

PROBLEMS, ALARMS, USEFUL ADVICES

What happens if...

Alarm signals

CLEANING AND MAINTENANCE

Precautions before cleaning

Cleaning the flue

PCB PARAMETERS

Parameter tables ECOMPACT 150

Parameter tables ECOMPACT 190

Parameter tables ECOMPACT 250

Parameter tables ECOMPACT 290

WIRING DIAGRAM

klover ECOMPACT 190 Specifications

General

Brand	klover
Model	ECOMPACT 190
Category	Boiler
Language	English