Do you have a question about the KLUBB K32 and is the answer not in the manual?
Brand | KLUBB |
---|---|
Model | K32 |
Category | Boom Lifts |
Language | English |
Details the manual's aim for safe lift use and critical warnings for operators.
Details included documents, data, and information for the receiver.
Defines key terms and presents general characteristics and dimensional specifications.
Covers allowed uses, identification data, CE compliance, and warranty terms.
Specifies requirements for operator training, age, and physical/psychological state.
Covers safety plates, general instructions, and mandatory personal protective equipment.
Details essential checks before work and safe practices during operation.
Illustrates and labels key components of the elevator system.
Details the upper/lower control panels, joysticks, buttons, and safety features.
Covers safety labels, pre-travel checks, and travel conditions.
Identifies main elements and describes driver's cabin controls.
Details the operation of the upper and downer remote control panels.
Guide for operating the lift from the bucket and ground controls.
Procedure for activating emergency shutdown and using the emergency pump.
Instructions on how to override safety shutdowns and movement limitations in emergencies.
Specifies requirements for maintenance operations, parts, and modifications.
Details daily checks and periodic inspections for proper lift functioning.
Mandatory maintenance schedule and checklist requirements for annual service.
Information on recommended hydraulic oils, filter changes, and lubrication points.
Solutions for issues related to movement, power take off, and stabilizers.
Addresses faults like incorrect leveling, movement limiters, and rough elevator movements.
Details the procedure for dismantling and requirements for qualified mechanics.
Presents the detailed hydraulic circuit diagram of the elevator system.
Instructions for editing the control record and procedures for delivering the elevator.
Forms for recording ownership changes and parts replacement.
Logs for tracking safety part renewals and general checkings/repairs.