12
I. Declaration of compliance
There follows a specimen of the CE compliance declaration:
CE compliance declaration relating to machines
Manufacturer
Company; KLUBB
Address; 12, av. James de Rothschild 77164 Ferrières en Brie, France
Telephone; +33 (0)1 60 95 12 47
Fax; +33 (0)1 60 05 68 38
Product identification
Description; Mobile Elevator platform for persons (MEPP) type 1 B
Type; KLUBB K32
MEPP Serial Number: 150001
Vehicle; Renault Master L2H2
Vehicle Serial Number; VF6MFFESC53485528
Technical datasheet
Without prejudice to its intellectual property rights, the request for information duly motivated on the technical
report is possible by letter to the following address:
Adress : KLUBB - 12, av. James de Rothschild 77164 Ferrières en Brie, France
Conformity This product was designed, manufactured and validated in compliance with the Machines
Directive of 17 May 2006 (2006/42/CE), the directive relating to electromagnetic compatibility of 15
December 2004 (2004/108/CE) and the directive relating to noise emission into the environment by
equipment used in open air of 8 May 2000 (2000/14/CE).
The assembly of the top structure of the MEPP and installation on the vehicle were carried out in compliance with
the methods defined by the manufacturer and the camber specifications given by the vehicle maker.
The results of all manufacturing inspections, examinations and qualification tests are registered in accordance to
the manufacturer quality process.
No modification to the control units, the safety components or options concerning safety of the elevator will be
authorized without explicit agreement by KLUBB.
CE Type review
This acceptance by type has been approved by the following notified organization:
Name: APAVE Parisienne SAS
Identification number; 0060
Address; 17 rue Salneuve – 75854 Paris CEDEX
CE type certificate No.; 0060/ 5536 / 760 / 11/15 / 0001
Harmonized standards Design, manufacturing, installation, protection and tests of the MEPP have been
performed in compliance with European, international and national standards.
The most important are
mentioned on the following list:
EN 280 MEPP – Design calculation – Stability criteria – Building – Security – Tests and reviews
EN 349 Machines safety – Minimum distance to avoid risks of crushing human body parts
EN 13849-1 Machine safety - Parts of control systems relative to safety
- Part 1: general design principles
EN 13849-2 Machine safety – Parts of control systems relative to safety - Part 2: validation
EN 60204-1 Machine safety – Machine electrical equipment - Part 1: General rules
ISO 20381 Mobile personnel elevators – Symbols used for operator controls and other indicators
Declaration location: Ferrières en Brie, France Date; 23/11/2015
Person authorized person to write this statement.
Name: Julien Bourrellis Position; CEO
Signature:
To Next Page
Loading...