What to do if my KLUGE KPI6020B switches off and 'F' flashes?
If the hob switches off while in use and an 'F' flashes on each display, it means the controls are damp or an object is resting on them. To resolve this, dry the controls or remove the object.
Why is the display on my KLUGE Hob blacked out?
If the display of your KLUGE Hob control card is blacked out and the hob or cooking zones cannot be switched on, it indicates there is no power supply. Check the household fuse for the appliance and verify if there is a power cut by testing other electronic appliances.
What does the 'U' symbol mean on my KLUGE KPI6020B Hob?
If the 'U' symbol lights up in the display of one of the cooking zones on your KLUGE Hob, it means there is no pan on the cooking zone, or the pan you are using is unsuitable. Use a suitable pan to resolve this issue.
Why does my KLUGE Hob make a clicking sound?
If your KLUGE hob makes a clicking sound or the saucepans make noise during cooking, it is normal with induction hob cookware. This is due to the energy transfer from the hob to the cookware. There is no risk to your hob or cookware.
Why does my KLUGE KPI6020B keep switching off?
If the hob switches off while it is in use, it is because one of the cooking zones has been on for too long. You can use the cooking zone again by switching it back on.
Why does the power level reduce automatically on my KLUGE Hob?
If power level 9 or 'P' is automatically reduced on your KLUGE Hob when you select power level 'P' or 9 on two cooking zones on the same side simultaneously, it indicates that the maximum power level for the two zones has been reached. Operating both zones at power level 'P' or 9 would exceed the permitted maximum power level for the two zones.
To Next Page
General