Klugmann KMO50TCX - Setting the Pre-Set Cooking; Setting the Time-Setting Options; Setting the Cooking Time; Setting the Clock

Setting the time-setting options
Setting the cooking time
The cooking time for your meal can be set on the oven. When the
cooking time has elapsed, the oven switches itself off
automatically. This means that you do not have to interrupt other
work to switch off the oven. The cooking time cannot be
accidentally exceeded.
The oven starts. The cooking time counts down in the display.
The cooking time has elapsed
An audible signal sounds. The oven stops heating.
Your oven has various time-setting options. You can use the
witch between the individual
functions.
A time-setting option that has already been set can
key to call up the menu and s
Setting the clock
Setting the pre-set cooking
The pre-set time has elapsed
An audible signal sounds. The oven starts cooking.
More flexibility and convenience: The appliance can be
programmed to preset the cooking end time and duration.
Setting the type of heating and temperature.
1.
In waiting state, touch the key.
and the hour
figures will flash.
Touch to finish the pre-set time setting.
5.
The symbol
lights up in the display
6.
Touch to finish the setting.
7.
Specifications
Touch to confirm, the minute figures will flash.
3.
Before setting the pre-set cooking, the clock must has been set.
Kitchen Timer can not be set after the pre-set cooking setting.
be changed directly with the parameter knob .
Refer to
Before using the appliance for the first time.
Changing the clock
setting the clock.
Repeat the steps of
Setting the timer
You can use the timer as a kitchen timer. It runs independently of
the oven. The timer has its own audible signal. In this way, you
can tell whether it is the timer or a cooking time which has
elapsed.
1.
In waiting state.Touch key to enter kitchen timer.
"00:00min " will flash.
Touch key to start timer.
3.
Childproof lock
The oven has a childproof lock to prevent children switching it on
accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been switched on.
Switching on the childproof lock
symbol appears in the display.
activated.
Switching off the childproof lock
key for approx. 3 seconds.
In waiting state, touch and hold the
There will be a long beep and the
The childproof lock is
symbol in the display.
key for approx. 3 seconds.
In locked state, touch and hold the
There will be a long beep and the
The childproof lock is
goes out
deactivated.
Touch or o r slide the to set the
be within 0--23.
hour figures. The input time should
2.
Touch or o r slide the to set the
be within 0--59.
figures. The input time should
4.
minute
Touch or o r slide the to set
the timer time.
2.
16