What to do if my Klutch 49404 Construction Equipment curbing machine will not turn on?
If your Klutch Construction Equipment curbing machine won't turn on, first ensure the power switch is in the “ON” position. Also, verify that you are using the correct size extension cord and that it's connected to a working, 115-volt, grounded electrical outlet. If the issue persists, have a qualified service technician examine the machine.
Why is my Klutch 49404 curbing machine extruding poorly?
If your Klutch Construction Equipment curbing machine extrudes poorly, ensure you properly mix the cement, sand, and water. Check that the slip form is correctly attached and that you're feeding the hopper properly. Also, make sure the compaction ram moves freely on its track and that the crank arm has been properly adjusted for the job. If problems continue, have a qualified service technician examine the machine.
Guidelines on selecting and using appropriate extension cords for proper operation and safety.
Detailed step-by-step instructions for safely removing and installing a new V-belt.
Information on obtaining replacement parts, including necessary details for ordering.
General| Brand | Klutch |
|---|---|
| Model | 49404 |
| Category | Construction Equipment |
| Language | English |
To Next Page