Klutch MIG250S - User Manual

MIG250S
OWNER’S MANUAL
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other
basic safety precautions may result in serious personal injury.
Item# 44452

Summary

General Safety Rules

IMPORTANT SAFETY CONSIDERATIONS

Key safety guidelines for welding environments, equipment condition, and proper usage.

WELDING ENVIRONMENT AND WELDER CONDITION

Specific Areas of Danger and Warning

ELECTRICAL SHOCK AND FUMES HAZARDS

Details electrical shock, fumes, gases, UV/IR arc rays hazards.

Fire Hazards and Hot Materials

FIRE HAZARDS AND HOT MATERIALS

Covers risks of flammable materials, sparks, flying debris, and handling hot components.

Electromagnetic Field and Gas Cylinder Safety

Proper Care, Maintenance, and Use

PROPER CARE, MAINTENANCE, AND USE

Know Your Welder

Assembly

Installation

POWER REQUIREMENT AND WIRING

WIRE INSTALLATION AND GAS SETUP

Steps for installing wire, setting drive roll tension, and gas installation.

Operation

BASIC OPERATION CONTROLS

Troubleshooting

Klutch MIG250S Specifications

General

Input Voltage	230V
Amperage Range	30-250A
Wire Diameter	0.023-0.045 in.
Weight	80 lbs
Welding Processes	MIG, Flux-Cored
Input Phase	Single Phase
Spool Size Capacity	4in
Welding Thickness	24 gauge
Duty Cycle	60% @ 250A