KMA TYLER THE FREQ SPLITTER

To Next Page

Instruction Manual+ Warranty

Safety Instructions

This device is intended to be used for sound

processing of signals from musical instruments.

Any other use or use under other operating

conditions is considered to be improper and may

result in personal injury or property damage.

No liability will be assumed for damages resulting

from improper use.

Operating conditions

This device has been designed for indoor use only.

To prevent damage, never expose the device to

any liquid or moisture. Avoid direct sunlight, heavy

dirt and strong vibrations.

External power supply

Use only with 9V power supply. Failure to do so

could result in damage to the device and possibly

the user. Unplug the external power supply before

electrical storms occur and when the device is

unused for long periods of time to reduce the risk

of electric shock or fire.

Warranty

We offer a 5-year warranty. The warranty expires

immediately if the product is changed, operated

incorrectly, intentionally or negligently damaged,

or if it is damaged by force majeure or use beyond

the permitted operating conditions.

Internal Controls

HP_S

Sets the high-pass channel FX-loop input

impedance

LP_S

Sets the low-pass channel FX-loop input

impedance

IN_S

Sets the general input impedance

More Pedals and Information

KMA Audio Machines

GUITAR AND BASS EFFECT PEDALS

Handmade in Berlin with love since 2013

www.kma-machines.com

MID

LOW HIGH

IN_S

HP_S LP_S

Need help?

Do you have a question about the KMA TYLER THE FREQ SPLITTER and is the answer not in the manual?

Summary

Internal Controls and Settings

Input Impedance Controls

Sets the general, high-pass, and low-pass channel FX-loop input impedance.

Safety and Operating Guidelines

Operating Conditions

Designed for indoor use only. Avoid moisture, direct sun, dirt, and strong vibrations.

External Power Supply Safety

Use only 9V power. Unplug during storms or long periods of disuse to prevent damage.

Warranty Information

Product Overview and Features

Controls and Functions

Low-Pass Filter Control

Sets the cut-off frequency of the low-pass filter, adjustable from 3 kHz to 20 Hz.

High-Pass Filter Control

Sets the cut-off frequency of the high-pass filter, adjustable from 3 kHz to 20 Hz.

Mix Control

Determines the ratio of low-pass to high-pass signal, from 100% LP to 100% HP.

Level Control

Adjusts the overall output volume, with a boost of up to 14 dB.

Phase Switch

Switches the phase of the high-pass signal to avoid cancellation issues.