KMS SPA18 - Page 10

6, Bio microcurrent ,click BIO ,and then adjust the model and intensity , click
to begin with face lifting treatment .
6. Adjust the water level and vaccum from the knob .
Treatment:
1. clean the targeted treatment area and make it dry;
2. put appropriate amount of liquid product into selected liquid bottle; set time and working pressure
accordingly;
Click “ ” to start the treatment and “ ” to stop it;
3. Beautician hold the vacuum dermabrasion handle to move closely on skin back and forth, with finger
moves with it;
4. The machine will pause automatically when the treatment time is over.
Figure.8