3. Hydrodermabrasion hose connect the inlet port 13;
4. put the hydro dermabrasion outlet hose into the port 12；；(Fig.1)
5. Connect the spray mist gun to port 14 ；
6, Connect the vacuum pen to port 15;
7. Conect the photon light to 20,21,22,23 channel .
8.,Connect the power line 17;
9. Open the power switch 18.
Parts introduce:
1, 10.4” touch screen
2, Photon light
3, Water level adjust knob
4, Vacuum adjust knob
5, hydro dermabrasion liquid bottle
6, filter
7,Hydro dermabrasion handle
8,Bio microcurrent handle
9, Vacuum pen( 3 sizes)
10,Spray mist gun
* Before operating the machine, please check the connections. Then turn on and off the machine for 3 to 5
times. Then keep the machine running for 5 minutes to check the stability of the machine.
Specifications ：
Hydro dermabrasion with 8 tips
Bio microcurrent 1 piece
Vacuum pen 3 different sizes
Photon light with 4 handles
Spray mist gun 1 piece
To Next Page
Loading...