Need help?Do you have a question about the Knauf PFT G 5 c and is the answer not in the manual?
Mandatory checks by delivery technicians after initial operation.
Details on safety switch settings for water and air.
Settings for compressor safety valve and pressure reducing valve.
Information on motor safety switches for various components.
Specification for the gap between air nozzle tube and spraying cap.
Setting star wheel direction and distance to the hopper base.
Guideline for setting star wheel distance based on mortar grain size.
Guidelines and rules of thumb for pressure settings in the mortar pump.
Details on pump components, their specifications, and maintenance.
Procedure to check conveying pressure and back pressure of the pump.
Information on operating pressure, hose selection, and using original PFT parts.
Explanation of 'Hand' and 'Automatic' modes for the water pump.
Specifications for connecting the machine to the electrical panel.
Essential checks to perform before powering the machine.
Instructions for connecting power and setting the correct motor rotation direction.
Adjusting water flow and setting the star wheel operation.
Procedure for testing and optimizing mortar consistency.
Steps to start the plastering operation after setup.
How to achieve and maintain the correct mortar consistency.
Selection and use of spraying guns and caps for optimal results.
Procedures for temporarily stopping and restarting spraying operations.
Step-by-step guide to clear blocked hoses.
Procedures for handling power or water supply interruptions.
Actions to take when there is a water supply failure.
Procedures for operating or storing the machine in subzero temperatures.
Instructions and warnings for transporting the machine modules.
References to circuit diagrams for different motor configurations.
Index of spare part lists for various machine components.
General| Type | Mixing pump |
|---|---|
| Max Pressure | 30 bar |
| Drive | Electric motor |
| Motor power | 5.5 kW |
| Water connection | 3/4 inch |
| Power supply | 400 V, 50 Hz |
| Conveying distance | Up to 50 m |
| Conveying height | Up to 30 m |
| Dimensions (L x W x H) | 1200 x 720 x 1550 mm |
| Application | Mixes and pumps pre-bagged dry mortars, plasters, and screeds |
To Next Page
