Need help?Do you have a question about the Knightsbridge LED Series and is the answer not in the manual?
Lists the specific product codes this manual applies to, aiding users in identifying relevant information.
Emphasizes compliance with wiring regulations, mains isolation, and circuit load checks for safe installation.
Covers IP rating, product class, and dimmability, guiding placement and functionality.
Advises users to confirm compatibility with external PIR or sensors before installation.
Details how to attach the luminaire using clips, including marking and drilling holes safely.
Explains connecting the 230V mains supply to the 24V driver, highlighting polarity.
Describes the LEDTD1 touch dimmer for flat range luminaires, including connection and maximum load.
Details the LEDDIMMER for flat and triangular ranges, its control capabilities, and maximum load.
Covers accessories like LED8SPLIT, LEDFCON, LEDTCON, and LEDRACON for linking multiple luminaires.
Explains the LEDTD2 connector for drivers without suitable secondary side connections.
Warns against disconnecting the product during high voltage testing to prevent damage.
Provides guidance on cleaning, recycling, non-replaceable LEDs, and the one-year warranty terms.
General| CRI | >80 |
|---|---|
| Input Voltage | 220-240V AC |
| Dimensions | Varies by model |
| Beam Angle | 120 degrees |
| IP Rating | IP65 |
To Next Page
