Need help?Do you have a question about the Knightsbridge SK006 and is the answer not in the manual?
Installation by a qualified electrician following current regulations is mandatory. Always isolate mains power before installation or maintenance.
Verify that the total circuit load, including this product, does not exceed the circuit rating. This product is Class I and requires an earth connection.
The product is rated IP54 only when in the closed position with no appliances attached.
Provide power to the installation point. Locate a suitable mounting place (10-50mm surface thickness) and cut a 90mm hole with 25mm clearance.
Remove collar/gasket, insert product, orient correctly, re-insert gasket, and tighten collar. Connect to mains supply via pre-wired cable.
To raise, gently lift the handle on the top cover until it clicks, indicating it is locked in position.
To lower the product, press the release button. Always use the handle to raise or lower the product.
Disconnect from circuit during high voltage testing. Recycle fitting correctly. Clean with a soft dry cloth only.
1-year warranty from purchase date. Invalidated by incorrect installation or improper use. Return to place of purchase for replacement.
General| Brand | Knightsbridge |
|---|---|
| Model | SK006 |
| Category | Household Appliance |
| Language | English |
To Next Page