with the provided set screw.
6. Connect the Mounting Adapter (with ADC-VDB750 device attached) to the existing Slim Line wallplate by latching
the top edge, then pushing the device into the wallplate, and then securing the original bottom set screw.
7. Restore power to the doorbell circuit (transformer).
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Thu, 08 Jun 2023 16:11:26 GMT
10
To Next Page
Loading...