The KNQZE Collapsible Foot Spa Massager, model MZD-02F, is a personal care device designed to provide a relaxing and therapeutic foot spa experience. It offers a combination of heating, bubble massage, shiatsu massage, and light indication, all controllable via a remote control panel.
Function Description:
The foot spa massager is engineered to soothe tired feet through a multi-functional approach. It features a heating element that allows users to set their desired water temperature, with options for Low (106℉), Mid (109℉), and High (113℉) temperatures, indicated by blue, yellow, and red lights respectively. The bubble function creates a gentle, effervescent massage to stroke the feet, enhancing relaxation. Integrated shiatsu rollers provide a deeper, more invigorating massage to the soles of the feet. The device also includes a pumice stone for exfoliation and a medicine box, presumably for adding bath salts or essential oils to the water, further enriching the spa experience. The collapsible design makes it convenient for storage and portability.
Important Technical Specifications:
- Product Name: Foot Spa Massager
- Product Model: MZD-02F
- Rated Voltage: AC 120V
- Rated Frequency: 60 Hz
- Rated Power: 500W
- Dimension (Unfolded/Folded): 41cm × 34cm × 19cm / 10cm
- Functions: Heating, Bubble, Shiatsu, Remote Control, Light Indicator
Usage Features:
The massager is designed for ease of use, with a clear direction for setup and operation.
- Unfolding: The device can be unfolded by pulling up the support rods and then pressing down to secure the basin.
- Water Filling: Users should add a mount of warm water into the basin. Cold water will require approximately 20 minutes to heat to the desired temperature.
- Powering On: Plug in the power cord, ensuring hands are dry. The device will emit three beeps, and a red light will illuminate, indicating it is in standby status.
- Temperature and Function Control: The remote controller is used to set the temperature and activate various functions.
- Control Button (on device):
- 1st Press: Starts the massager in Low TEMP Mode (106℉) with bubbles, indicated by a blue light and a beep.
- 2nd Press: Switches to Middle TEMP Mode (109℉) with bubbles, indicated by a yellow light and a beep.
- 3rd Press: Switches to High TEMP Mode (113℉) with bubbles, indicated by a red light and a beep.
- 4th Press: Turns off bubbles and enters Standby Mode, indicated by a red light and three beeps.
- Remote Control Panel:
- BUBBLE: Activates/deactivates the bubble function.
- ON/OFF: Powers the device on or off.
- TIMER: Sets the operating time. One press sets it to 20 minutes (indicated by one beep), and two presses set it to 1 hour (indicated by a double beep).
- LOW TEMP (↓): Sets the temperature to 106℉ (blue light).
- MID TEMP (↓): Sets the temperature to 109℉ (yellow light).
- HIGH TEMP (↓): Sets the temperature to 113℉ (red light).
- Battery Replacement (Remote Control): To replace the CR2025 button battery, remove the battery case from the remote controller, take out the old battery, insert the new one, and reattach the battery case.
Maintenance Features:
Proper cleaning and storage are essential for the longevity and hygiene of the foot spa massager.
- Cleaning:
- Clean the device with a soft, damp cloth and a mild cleansing agent only.
- DO NOT immerse the massager in water or clean it under a faucet.
- If there is dirt on the strainer/medicine box, remove it, clean the dirt, and rinse with water.
- Storage:
- Before storing, wipe off any residual moisture with a dry cloth or towel to prevent mold.
- Store the unit in a clean and dry place.
- DO NOT drag or hang the unit by the power cord.
- Never place the appliance close to a fireplace or other heating sources.
Important Safety Precautions (Attention):
- Never pull the product by the cord to avoid damage.
- Always place the product horizontally, whether in use or not.
- Never use the product without water.
- Always cut off power and unplug the device after use.
- Discontinue use immediately if the product is damaged or working abnormally.
- If you experience dizziness, headache, or any other discomfort during use, stop using the device.
- Keep the power cord dry and avoid touching the heater.
- The product is not suitable for individuals with cardiac conditions, pregnant women, or those with severe cerebral thrombosis.
- Do not stand on the product or place heavy objects on it.
- Do not pour water hotter than 113℉ directly into the product, as it may cause deformation.
- Do not add corrosive liquids or liquids with particles/floccules into the product.
- Children's use should be under parental guidance.
- It is not recommended to use the product within 30 minutes before or after meals.
Troubleshooting:
For common issues, the manual provides solutions:
- Heating function not working: Check and connect the product to the power supply.
- Product not working: Ensure the product is properly activated after connecting to the power supply, following the user manual strictly.
- Stops working mid-use: Stop the machine and restart it after 30 minutes.
- Leakage: Unplug the device promptly and check the product's quality. For unresolved issues, contact knqzeservice@gmail.com.
To Next Page
General
