Need help?Do you have a question about the Ko Propo EX-1 Mars and is the answer not in the manual?
General| Brand | Ko Propo |
|---|---|
| Model | EX-1 Mars |
| Category | Transmitter |
| Language | English |
Guidance on locating specific information within the manual.
Details regarding product usage compliance with regulations and modifications.
Miscellaneous important notes and disclaimers regarding manual content and usage.
Defines warning symbols and their meanings for safe operation.
Illustrates and explains prohibited and enforcement matters.
Covers critical warnings related to crystals, equipment connection, and servo mounting.
Guidance on installation, driving precautions, and avoiding hazardous conditions.
Precautions for operating the unit in various driving conditions.
Safety guidelines for charging Ni-cad batteries and hydropacks.
Instructions on how to use the transmitter's key panel functions.
Crucial instruction on the correct procedure for switching off the transmitter.
Step-by-step guide to access the battery compartment.
Instructions for inserting AA size dry cell batteries.
Procedure for inserting rechargeable battery packs.
Details on how to charge the Ni-cd battery pack.
Guide on how to use and store the tuning screwdriver.
Instructions for adjusting the trigger bar for optimal fit.
Steps for removing and attaching the color grip pads.
Procedure for changing RF modules and crystals for frequency adjustment.
Description of the initial screen, operation timer, and system level display.
Explanation of battery alarms and memory error messages on the LCD.
Details on the Pilot Lamp, System Mode Lamp, and Function Mode Lamp.
Guide on how to select and change the system level for customized functionality.
Overview of available functions across different system levels.
Detailed screen tables and explanations of Function Mode, System Mode, and Direct Mode.
Keeps time from start to stop, with minute alarms.
Stores lap times, acts as an auto lap counter with alarms.
Features for setting race time (Alarm), pre-alarm, and reviewing lap memory.
Selectable items to be adjusted by the Et lever or Dial.
Assigns functions to Custom Keys (KyA~C) for one-touch access.
Assigns ON/OFF functions to buttons BT1 and BT2.
Adjusts the amount of servo movement for each step of trim.
Confirms the position of trim levers or Et levers.
Selects between 2-channel or 3-channel operation.
Assigns a button to operate the 3-channel function.
Recalls the last five setting data values on the Function Mode screen.
Returns settings to the condition when the model was last changed or power was on.
Resets all model memory data to factory default settings.
Sets the timer value manually.
Sets timer based on when fuel runs out.
Sets a pre-alarm to predict remaining time.
Sets the servo to the full throttle position.
Sets the trigger position for throttle preset activation.
Sets how far the servo returns from the trigger point in braking.
Sets the starting point of the pumping effect.
Sets the turn and return cycle of the servo.
Sets the time when pumping effect starts after braking operation.
Adjusts the time ratio between ON/OFF brakes in pumping effect.
Copies all model memory data to other model memories.
Enables or disables automatic LCD display when operating levers.
Sets the return amount from the operation position for swing effect.
Sets the starting point of the swing effect from neutral.
Sets the ending point of the swing effect.
Sets the repetition speed of the swing effect.
Critical warnings about using genuine parts and proper connections.
Illustrates servo and ESC/throttle connections for different car types.
Minimizing noise interference by proper placement of components.
Guidance on optimal placement for antenna sensitivity.
Positioning the receiver away from noise sources like motors and ESCs.
Specific instructions for mounting the receiver on electric cars.
Using brackets or sponges to cushion receivers from vibration.
Instructions for mounting the antenna holder and routing the wire.
Definitions for terms A through M related to radio control.
Definitions for terms N through W related to radio control.
Details on operation method, channels, frequency, and power for the transmitter.
Details on reception method, channels, frequency, and power for the receiver.
To Next Page
