Need help?Do you have a question about the Ko Propo EX-10 EURUS and is the answer not in the manual?
Warnings for installing transmitter and receiver components.
Safety guidelines for operating the RC model.
Post-operation checks and storage precautions for the transmitter.
Customizing steering range, trigger position, and wheel angle.
Procedures for installing standard and optional battery packs.
Guidelines for minimizing radio noise interference.
Procedure for registering the receiver to the transmitter.
Configuring the fail-safe behavior of the RC system.
Steps for powering up and verifying control responses.
Steps for powering down the transmitter and receiver.
Selecting, naming, and copying model memories.
Adjusting neutral position and steering movement range.
Adjusting steering balance and fine-tuning neutral position.
Adjusting servo speed and steering output.
Setting steering speed ratio and direction.
Adjusting steering travel and balance dynamically during operation.
Adjusting neutral throttle position and maximum forward output.
Adjusting maximum reverse output and neutral throttle position.
Adjusting throttle response speed and neutral position punch.
General| Brand | Ko Propo |
|---|---|
| Model | EX-10 EURUS |
| Category | Transmitter |
| Language | English |
To Next Page
