Ko Propo EX-1UR User Manual

é
Thank you for purchasing EX-1UR (hereafter referred to as this unit). Read this operation manual care-
fully before using this unit in order to understand the explanation. After reading this manual, store it taking
care not to lose it.
For the latest information, see our web site (http://www.kopropo.co.jp).
How to read this manual
"How to Use This Unit" explains the basic method of using the transmitter.
In addition, see the function menu items to master each function.
For added or modified functions in this unit, particularly, see the following items.
Steering motor ..........................................................
Throttle motor ...........................................................
Response mode .......................................................
(Advanced high speed response
/Ultrahigh speed response)
Throttle idle up ..........................................................
3ch/4ch setting .........................................................
Steering quick reaction .............................................
Throttle quick reaction ..............................................
Notes on application, exportation and modification of the products
1. This unit can be used only for control of models.
The application of this unit is limited to models by the Japanese law.
Applicable models are ground surface and water surface radio control models.
2. (a) If this unit is exported from Japan, the unit cannot be used with a frequency that is not permitted
by the radio law of the country of destination.
Authorization according to the national law of the country of destination may be required.
(b) If this unit is used for an application other than for models, it may be subject to restrictions based
on the Export Trade Control Ordinance.
In this case, procedures according to the law such as submission of export permit may be
required.
3. If this unit is disassembled, adjusted or modified or parts are replaced by a person other than our
company, we are not liable for any problem including repair.
Other notes
It is illegal to reproduce the contents of this manual without permission.
The contents of this manual and the specifications of the product are subject to changes without prior
notice.
Although every effort has been made to ensure the accuracy of the information contained in this
manual, please contact us if you have any questions or if you find any errors. (For contact address,
see the end of this manual.)
We cannot assume any responsibility for any damages arising from its usage.
•
•
•
•
•
•
READ FIRST
(P.15)
(P.23)
(P.9)
(P.32)
(P.38)
(P.20)
(P.28)

Ko Propo EX-1UR Specifications

General

Brand	Ko Propo
Model	EX-1UR
Category	Motorized Toy Car
Language	English

Summary

READ FIRST

Manual Usage Guidance

Explains how to read the manual and lists key functions.

Product Policies and Notes

Covers application, export, modification, and other important notes.

Safety Precautions

Warning and Sign Explanations

Explains the meaning of danger, warning, caution signs, and picture indications.

Notes on Assembly and Operation

Advises on safe assembly, driving, and battery handling.

Chapter 1 How to Use This Unit

Names of Parts

Identifies and labels all parts of the transmitter.

Key Operation and Function Menu List

Explains menu navigation and lists available functions.

Preparation for Using This Unit

Steps for preparing the unit, including battery installation and charging.

Features of This Unit

Response Mode Settings

Explains switching response modes and their compatibility.

Performance Tuning Settings

Adjusting response, quick reaction, and steering angle for performance.

Calibration and Control Adjustments

Guides on setting trim, sub trim, and Direct Servo Control.

Chapter 2 Function Menu Setting

STEERING RELATED SETTING

Settings related to steering control and servo response.

Steering Calibration and Neutral Adjustment

Adjusting neutral position, trim, sub trim, and balance.

Steering Travel and Response Tuning

Adjusting steering travel, quick reaction, and response speed.

Steering Angle and Direction Settings

Adjusting physical angle, movement direction, and trim rate.

THROTTLE RELATED SETTING

Throttle Calibration and Neutral Adjustment

Adjusting neutral position, trim, and sub trim for throttle.

Throttle Travel and Response Tuning

Setting forward/brake amounts, quick reaction, and response speed.

Throttle Curve and Acceleration Settings

Adjusting throttle curve, acceleration, and ABS settings.

3CH/4CH SETTING

Movement Amount Display

Checks current movement amount for 3ch or 4ch.

Output Amount Setting

Sets the button for 3ch/4ch operation and output amounts.

OTHER SETTING

Channel, Response, and Button Settings

Configures channels, response modes, and assigns button functions.

Utility and System Management Functions

Covers stop watch, timers, calibration, reset, and model memory operations.

Chapter 3 Installation of Receiver

Receiver Parts and Connections

Identifies receiver parts and shows connection examples.

Frequency Setup and Installation Notes

Explains frequency setup and provides critical installation notes.

Chapter 4 Appendix

Specifications

Lists the technical specifications for the transmitter and receiver.

Terminology

Defines technical terms used throughout the manual.