Tools Required:
Phillips Head Screwdriver
Items Included:
Wall Mount Liner Dispenser
Liner Dispenser Lid
Bobrick Universal Key
Mounting Screws
1. Using the Universal Bobrick Key (provided),
unlock and open liner dispenser lid. This will
expose liner dispenser mounting holes. Remove
any liners currently in the cavities.
2. Unscrew the four screws inside the liner
dispenser cavity. Remove liner dispenser from
metal mounting bracket. Discard old liner dispenser,
liner dispenser lid, and screws.
3. Ensure replacement liner dispenser is free
from damage. Using key, unlock, and open liner
dispenser lid. This will expose liner dispenser
mounting holes.
4. Line up liner dispenser mounting holes onto
mounting bracket and secure with the four screws
provided. Fill liner dispenser with liners. Close and
lock the liner dispenser lid.
5. Clean up work area and discard waste.
KB200 LINER DISPENSER REPLACEMENT KIT INSTRUCTIONS
P/N 465-KIT
Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399
www.koalabear.com
®
P/N 361 December 2010
To Next Page
Need help?
General
