To Next PageTo Next PageWhy does my Kobalt KB18 Nail Gun tool jam frequently?
Your Kobalt Nail Gun may be jamming frequently due to several reasons: * The fasteners might be the incorrect size. Ensure you're using the correct size fasteners. * The fasteners could be damaged. Try replacing them with new ones. * The magazine might be loose. Tighten the screws to secure it. * The magazine could be dirty. Clean the magazine to remove any debris.
How to fix an air leak near the bottom of Kobalt KB18 Nail Gun?
If you notice an air leak near the bottom of your Kobalt Nail Gun, it's likely due to loose screws. Tighten the screws to resolve the leak.
How to fix an air leak near the top of Kobalt Nail Gun?
If you experience an air leak near the top of the tool or in the trigger area of your Kobalt Nail Gun, the cause is likely loose screws. Try tightening the screws.
Details on required safety equipment including eye, apparel, and respiratory protection.
Guidelines for connecting the tool to a clean, dry air supply with regulated pressure.
Ensuring a safe work environment, including clutter, ventilation, and keeping others at a distance.
Instructions for safe tool handling, including common sense, alertness, and proper trigger/workpiece contact.
Guidance on maintaining the tool's condition and rules for professional servicing.
Instructions for checking, removing, and replacing the no-mar pad on the tool.
Steps for connecting the tool to an air supply using a quick-connect swivel connector.
Procedure for safely loading brad nails into the tool's magazine.
Explanation of the lockout feature that disables operation when fasteners are low.
Details on setting and using the selectable trigger in Single Actuation mode.
Instructions for using the tool in Contact Actuation mode for repetitive fastening.
Methods for adjusting fastener drive depth, including air pressure and the depth adjustment feature.
Steps to safely remove a strip of fasteners from the tool.
Procedure for safely clearing a jammed fastener using the jam release mechanism.
Guidelines for cleaning the tool, avoiding harmful solvents, and proper lubrication.
Advice for cold weather operation, storage, and ensuring adequate air supply pressure and volume.
Information on obtaining replacement parts and a list of available parts like the No-Mar Pad.
General
