Kobalt KBTS124B-03 User Manual

8
OPERATING INSTRUCTIONS
3. Turn the speaker ON/OFF
a. To turn on the Bluetooth speaker, press and
hold the ON/OFF button (A) for approximately
3 seconds; the indicator (E) will illuminate a
blue light and begin to ash to indicate that the
Bluetooth speaker is active.
b. To turn off the Bluetooth speaker, press and
hold the ON/OFF for button approximately 3
seconds; the blue light will be off to indicate
that the Bluetooth speaker is deactivated.
c. When the Bluetooth speaker is not in use for
about 10 minutes, the Bluetooth speaker will
automatically turn off, and the blue light will be
off.
4. USB Power Port
When a battery pack is installed or the speaker
is connected to an AC power supply , and the
speaker is turned on, the USB power port (F) on
the Bluetooth speaker supplies a charging site for
your cell phone or other small USB device (5 Volt
DC, up to 2.1 Amp).
NOTE: Any device that uses more than 2.1 A
of DC electrical current will trip a self-resetting
overload switch and disable the output. To
reactivate the Bluetooth speaker, remove the
device and turn on the Bluetooth speaker.
5. Volume
Use the Volume + button (B) and Volume - button (C) to increase or decrease the volume of
the speaker.
NOTE: To control the volume by using the paired device’s controls, rst turn the speaker
volume to max (a beep will sound).
3
H
A
4
F

Kobalt KBTS124B-03 Specifications

General

Brand	Kobalt
Model	KBTS124B-03
Category	Speakers
Language	English