Kobalt KBTS124B-03 User Manual

7
OPERATING INSTRUCTIONS
1. To Attach Battery Pack
a. Align the raised portion on the battery
pack with the grooves on the bottom of the
Bluetooth speaker, then slide the Bluetooth
speaker onto the battery, as shown.
b. Make sure that the battery-release buttons
on the battery pack snap into place and the
battery pack is secured to the Bluetooth
speaker before beginning operation.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on the battery pack
aligns with the groove on the tool and the latches
snap into place properly. Improper assembly of
the battery pack can cause damage to internal
components.
To Detach Battery Pack
a. Press the battery-release buttons to release the battery pack.
a. Pull forward on the Bluetooth speaker to remove it from the battery.
2. DC IN Jacket
The Bluetooth speaker can be also powered by
an AC power supply (normal household current).
To connect the Bluetooth speaker to an AC power
supply:
Insert the charging plug of the AC adaptor (M)
into the DC IN jack (G); make sure that they are
properly connected.
Connect the AC adaptor to the power outlet.
NOTE: Turn off the unit before connecting or
disconnecting the AC adaptor. Otherwise, it may
cause malfunction.
NOTE: Do not insert any small objects into the
jacks or ventilation hole on the unit. The unit may
short out or malfunction.
1
Battery-
release
buttons
2
G
M

Kobalt KBTS124B-03 Specifications

General

Brand	Kobalt
Model	KBTS124B-03
Category	Speakers
Language	English