8
PREPARATION
1. Align either of the grooves (E) in the blower tube
(B) with the tabs (F) on the blower (A). Push the
tube into the blower until the tabs (F) engage
the grooves (E).
1
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
ASSEMBLY INSTRUCTIONS
WARNING
To prevent accidental starting that could cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
B
2. Turn the tube in the direction of the arrow
until both of the tabs slide into locked position.
2
E
F
ASSEMBLING THE BLOWER TUBE
To Next Page
Loading...
Need help?
General
