EasyManua.ls Logo

Kobalt KLB 1040B-03 - Troubleshooting; Troubleshooting: Tool Does Not Work; Troubleshooting: Reduced Air Velocity; Warranty

Kobalt KLB 1040B-03
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
TROUBLESHOOTING
WARNING
Turn the switch to the “OFF” position and remove the battery before performing
troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Tool does not work.
1. Low battery pack
capacity.
1. Charge the battery pack.
2. The battery pack or
blower are too hot.
2. Turn off the blower and allow the
blower and battery pack to cool.
The air velocity
decreases noticeably.
The air inlet is blocked by
debris.
Remove the battery pack; clear the
debris.
WARRANTY
For 5 years from the date of purchase, this product is warranted for the original purchaser to
be free from defects in material and workmanship. This guarantee does not cover damage
due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use. This warranty is limited to 90 days for commercial and rental use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specic legal rights, and you may also have other rights
that vary from state to state.
Lowe’s Home Centers LLC. Mooresville, NC 28117
Printed in China

Related product manuals