14
kobalttools.com
ASSEMBLY INSTRUCTIONS
2. Installing the mulching plug
(for mulching operation)
Note: When using the mulching plug (B), do not install
the grass catcher.
at a slight angle.
3. Installing the grass catcher
(for rear bagging operation)
Note: When using the grass catcher (D), do not install
the mulching plug.
the rear discharge door (N) so that the hooks on the
grass catcher are seated onto the slots on the
mower housing.
to mow.
2
3
N
B
D
N
b. To lower the handle assembly:
Note:
the knobs on the upper handle locks by turning them
counterclockwise.
is free from the slot. Then, fold the handle to the front
of the unit. Avoid pinching or trapping any cables.
1b
M
To Next Page
Loading...
Need help?
General
