To Next PageTo Next PageWhy does the cutter bind, jam, or burn the wood when using my Kobalt Wood Router?
If the cutter binds, jams, or burns the wood when using your Kobalt Wood Router, it could be due to improper operation or a dull cutter bit. Refer to the 'OPERATING INSTRUCTIONS' section for guidance on proper use. Additionally, consider replacing or sharpening the cutter bit to resolve the issue.
General| Corded/Cordless | Corded |
|---|---|
| Soft Start | Yes |
| Variable Speed | Yes |
| Depth Adjustment | Yes |
| Cord Length | 6 ft |
| Voltage | 120V |
| Collet Size | 1/4 inch |
| Base Type | Fixed |
| Amperage | 8 A |
Review manual, symbols, and general safety guidelines before operation.
Adhere to safety for work area, electrical connections, and personal protection.
Follow guidelines for tool operation, care, and safe battery handling.
Crucial safety measures specific to the compact router's use.
Understand the router's features and adhere to safety requirements before use.
Procedures for attaching/detaching the battery pack and fixed base.
Guide for installing/removing cutter bits and adjusting cutting depth.
Explanation of LED worklights, vacuum adaptor, ON/OFF switch, and soft start.
Tips on using variable speed, edge guides, and general routing practices.
Guidance on feeding rate and direction for optimal finish and avoiding issues.
Guidelines for general cleaning and recommended maintenance procedures.
Procedures for maintaining collets and cutting bits for optimal performance.
Steps to diagnose and resolve issues when the tool does not work.
Solutions for problems like cutter binding, jamming, or burning the wood.
