12
ASSEMBLY INSTRUCTIONS
M
N
O
5a. TO INSTALL BATTERY PACK
• Open the battery compartment cover (G).
• Align the battery (V) with the cavity in the snow
thrower housing.
• Insert the battery into the right battery compartment
when standing in the operating position to start the
snow thrower. This snow thrower is equipped with
a battery storage compartment to store an extra
battery pack to extend your runtime.
• Slide the battery down to lock it into position. The
battery is fully inserted into the snow thrower when
you hear an audible “click”.
• Close the battery compartment cover.
5b. TO REMOVE BATTERY PACK
• Release your grip on the bail lever to stop the
snow thrower.
• Press the battery release button in the snow
thrower housing. This will cause the battery to
raise out of the tool slightly.
• Remove battery pack from the snow thrower.
WARNING
Always remove battery from your tool when you are assembling parts, making adjustments, cleaning,
or when not in use. Removing battery will prevent accidental starting that could cause serious
personal injury.
5
G
V
Battery
release
button
To Next Page
Loading...
Need help?
General
