5
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their mean-
ing. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
Wh Watt Hour Energy Storage Capacity
Ah Amp Hour Current Capacity
Direct Current Type or a characteristic of current
Class II Construction Double-insulated construction
RPM Rotating Speed Revolutions per minute
/min Per Minute Revolutions, strokes, surface speed, orbits
,
etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s
Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection
Always wear eye protection with side shields marked to
comply with ANSI Z87.1.
Safety Alert Precautions that involve your safety.
Hand and Feet Keep hands and feet away.
Safe Distance Keep bystanders a safe distance from the machine.
Stop the Machine
Stop the motor and remove the battery before leaving the
machine.
Moving Parts
Stay away from moving parts. Keep all guards and
shields in place.
Thrown objects
Thrown objects can ricochet and result in personal injury or
property damage.
Hand and feet Keep hands and feet away from rotating impeller.
Hand Keep hands away from the discharge area.
To Next Page
Loading...
Need help?
General
