To Next PageTo Next PageWhat to do if bit cannot be installed in Kobalt Power Tool?
If you're unable to install a bit in your Kobalt Power Tool, there are a couple of potential reasons: * The chuck may not be released. Make sure to release the chuck. * The bit may not fit the chuck. Use an appropriate bit or a suitable adaptor.
What to do if the LED worklight on my Kobalt Power Tool blinks rapidly?
If the LED worklight on your Kobalt Power Tool is blinking rapidly, it indicates that the tool has stopped working to protect its internal circuits. To resolve this, release the trigger switch, allow the tool to cool down, and then restart it.
Why is the LED worklight blinking slowly on my Kobalt Power Tool?
If the LED worklight on your Kobalt Power Tool is blinking slowly, it means the battery charge is very low. Charge the battery to solve this problem.
General safety precautions applicable to all power tools, including shock and injury risks.
Essential safety measures for the operator, including alertness and protective equipment.
Critical safety instructions tailored for specific products like drills, impact drivers, batteries, and chargers.
Compliance information for the device according to FCC rules.
Familiarize yourself with the features and safety requirements of each tool before use.
Covers battery, trigger, gear box, direction selector, chuck, and clutch for drill/driver.
Covers battery, trigger, direction selector, LED, speed, finish mode, and bits for impact driver.
Covers power indicator, cold weather, and charging procedures for the battery pack.
Covers charging, display indicators, and wall-mounting for the battery charger.
Includes cleaning and chuck removal procedures for the drill/driver.
Includes cleaning procedures for the impact driver.
Includes cleaning procedures for the battery pack and tool.
Includes cleaning procedures for the battery charger.
General safety precautions applicable to all power tools, including shock and injury risks.
Essential safety measures for the operator, including alertness and protective equipment.
Critical safety instructions tailored for specific products like drills, impact drivers, batteries, and chargers.
Compliance information for the device according to FCC rules.
Familiarize yourself with the features and safety requirements of each tool before use.
Covers battery, trigger, gear box, direction selector, chuck, and clutch for drill/driver.
Covers battery, trigger, direction selector, LED, speed, finish mode, and bits for impact driver.
Covers power indicator, cold weather, and charging procedures for the battery pack.
Covers charging, display indicators, and wall-mounting for the battery charger.
Includes cleaning and chuck removal procedures for the drill/driver.
Includes cleaning procedures for the impact driver.
Includes cleaning procedures for the battery pack and tool.
Includes cleaning procedures for the battery charger.
General| Brand | Kobalt |
|---|---|
| Model | KWL 224-03 |
| Type | Work Light |
| Brightness | 2200 Lumens |
| Color Temperature | 5000K |
| Power Source | Corded Electric |
| Voltage | 120V |
| Light Output | 2200 Lumens |
