The KOBALT Digital Tire Gauge, model #SGY-AIR151JH (Item #336417), is a handheld device designed for measuring and releasing air pressure in tires. It features a digital display for clear readings and is intended for use by consumers to maintain proper tire pressure, which is crucial for safety and tire longevity. The device is powered by two 3V CR2032 lithium batteries, which are pre-installed and replaceable.
Function Description
The primary function of the KOBALT Digital Tire Gauge is to accurately measure tire pressure and display it digitally. It also includes a pressure release button, allowing users to reduce tire pressure if it is too high. The gauge is designed for ease of use, with a simple on/off switch that also functions as a reset button.
Important Technical Specifications
- Model Number: SGY-AIR151JH
- Item Number: 336417
- Power Source: 2 x 3V CR2032 lithium batteries (pre-installed)
- Display: Digital, showing pressure readings in PSI (Pounds per Square Inch).
- Automatic Shut-off: The gauge features an automatic shut-off within 60 seconds from activation to conserve battery life.
- Reset Function: The on/off switch also serves as a RESET button, allowing the display to revert to ZERO.
Usage Features
The KOBALT Digital Tire Gauge is designed for straightforward operation:
Testing Tire Pressure:
- Activation: Press the on/off switch (B) for 1-2 seconds to turn on the gauge. The display (C) will show "0.0 PSI".
- Attaching to Valve: Push the gauge nozzle (A) onto the tire valve stem, ensuring a tight seal to prevent air leakage.
- Reading Lock: Hold the gauge on the valve stem until the pressure reading locks on the display (C).
- Removal and Readout: Promptly remove the gauge from the valve stem and read the pressure displayed.
- Continuous Use: The gauge can be used for subsequent tire pressure tests without resetting, by repeating steps 2 and 3.
- Automatic Shut-off: The device will automatically turn off after 60 seconds of inactivity.
- Resetting Display: Pressing the on/off switch (B) at any time will reset the display to ZERO.
Releasing Air Pressure from Tire:
- Pressure Release: Press the pressure release button (D) for several seconds. A hissing sound indicates air escaping.
- Re-measure Pressure: To check the current air pressure after releasing air, repeat the steps for "Testing Tire Pressure" (steps 1, 2, and 3).
- Current Air Pressure: When releasing air, push the on/off switch (B) to read the current air pressure.
- Display Behavior: The reading on the display (C) will remain unchanged while air is being released around the pressure release button (D).
- Caution: Do not press the pressure release button (D) for too long, as this may lead to excessive release of tire pressure.
Maintenance Features
The KOBALT Digital Tire Gauge requires minimal maintenance, primarily focusing on battery replacement and general care:
General Care:
- Operation: Always operate the product with care, following the provided instructions.
- Cleanliness: Keep the product clean after each use.
- Storage: Store the product in a dry and safe place, out of reach of children, when not in use.
Changing the Batteries:
- Access Battery Cover: Open the battery cover (E) by removing the screw (F) using a Phillips screwdriver (not provided).
- Replace Batteries: Carefully remove the two old 3V CR2032 batteries (b) and replace them with new ones. Ensure the new batteries are placed with the "+" side facing up.
- Secure Cover: Always completely secure the battery compartment after replacement. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.
Battery Disposal and Safety:
- Disposal: Remove and immediately recycle or dispose of used batteries according to local regulations, keeping them away from children. Do NOT dispose of batteries in household trash or incinerate them.
- Ingestion Hazard: This product contains button cell batteries. Ingestion can cause serious injury or death, with internal chemical burns occurring in as little as 2 hours. Keep new and used batteries OUT OF REACH of CHILDREN. Seek immediate medical attention if a battery is suspected to be swallowed or inserted into any part of the body.
- Battery Handling:
- Non-rechargeable batteries are not to be recharged.
- Do not force discharge, recharge, disassemble, heat above 60 degrees C, or incinerate batteries, as this may result in injury due to venting, leakage, or explosion causing chemical burns.
- Ensure batteries are installed correctly according to polarity (+ and -).
- Do not mix old and new batteries, different brands, or types of batteries (e.g., alkaline, carbon-zinc, or rechargeable).
- Remove batteries from equipment not used for an extended period according to local regulations.
Troubleshooting:
- Product display will not light up: Possible cause is a low battery. Corrective action is to replace the batteries.
- The word "LOW" appears in the display: Possible cause is a low battery. Corrective action is to replace the batteries.
Users are advised to read and understand the entire manual before operating the product. Customer service is available at 888-3KOBALT (8 a.m. - 8 p.m., EST, Monday-Sunday) or via email at ascs@lowes.com for questions or issues.
Warnings:
- Improper operation or maintenance can lead to serious injury or property damage.
- Never operate the product near flammable substances (gasoline, naphtha, cleaning solvents, etc.) or contact it with water.
- Do not drop or step on the product to prevent damage or personal injury.
- Use the product only for its intended purpose.
Cautions:
- Always follow tire manufacturer's recommended tire pressure ratings.
- Do not attempt to open or disassemble the product unless replacing batteries.
- Dispose of batteries properly after replacement to avoid accidental ingestion.
Notes:
- The electronic module is factory sealed with no user-serviceable parts.
- The device complies with Part 15 of FCC Rules, meaning it will not cause harmful interference and must accept any interference received.
- The equipment has been tested and complies with Class B digital device limits, providing reasonable protection against harmful interference in residential installations. If interference occurs, users are encouraged to reorient/relocate the receiving antenna, increase separation between equipment and receiver, connect equipment to a different circuit outlet, or consult a radio/TV technician.
- The device complies with CAN ICES-3 (B)/NMB-3(B) conditions regarding interference.
The KOBALT Digital Tire Gauge is a reliable and user-friendly tool for maintaining optimal tire pressure, contributing to safer driving and extended tire life.
To Next Page
Need help?
General
