Need help?Do you have a question about the Kobastar XK3118T1 and is the answer not in the manual?
General| Brand | Kobastar |
|---|---|
| Model | XK3118T1 |
| Category | Accessories |
| Language | English |
Lists technical specifications like A/D conversion, accuracy, load cell excitation, division, and display.
Describes the indicator's interface, showing connections for calibration, battery, adapter, load cell, and Rs232.
Details the connection specifications for load cells, including pin assignments and shield connection.
Explains the serial port communication wire connection with a chart of port assignments.
Covers automatic zeroing on power on/off and manual zeroing using the ZERO key.
Explains how to perform tare operations to set the net weight and enter NET display mode.
Details how to accumulate total weight, display it, check adding times, and clear the total.
Guides through calibration steps including setting division, decimal point, full capacity, zero, and linearity.
Covers function settings (kg/lb, animal scale) and power save mode configurations.
Details baud rate settings and communication mode options for data transfer.
Explains how to set high and low thresholds for indicator lights (HI, LO, OK).
Covers calibration for zero trace range and manual set zero range.
Details various communication formats for sending net weight, gross weight, and response modes.
Lists common error codes (Err 01-10) and their corresponding meanings for troubleshooting.
Lists the included items in the K1 package, such as indicator, adapter, manual, and certificate.
To Next Page
