To Next PageTo Next Page
Need help?Do you have a question about the Kobelco ACERA Geospec SK200-8 and is the answer not in the manual?
General| Bucket Capacity | 0.8 m³ |
|---|---|
| Tail Swing Radius | 2, 750 mm |
| Swing Speed | 11.5 rpm |
| Fuel Tank Capacity | 400 L |
| Engine Power | 110 kW |
| Maximum Digging Depth | 6, 600 mm |
| Maximum Reach at Ground Level | 9.9 m |
| Travel Speed | 5.5 km/h |
Provides overall dimensions of the excavator models, including length, width, and height.
Details speed, climbing capability, engine, hydraulic components, and weight specifications for various models.
Lists detailed engine specifications such as model, type, displacement, rated output, and torque.
Details specifications for hydraulic pumps, control valves, travel motors, and swing motors.
Provides dimensional data for the excavator's working envelope with different attachments.
Illustrates lifting capacities at various working radii and configurations.
Specifies recommended oils, greases, and filter elements for various machine components.
Outlines standards and procedures for testing various machine systems during maintenance.
Provides standard values and tolerances for key inspection items for the SK140LC-8.
Provides standard values and tolerances for key inspection items for the SK200-8.
Provides standard values and tolerances for key inspection items for the SK250-8.
Provides standard values and tolerances for key inspection items for the SK330-8.
Provides standard values and tolerances for key inspection items for the SK460-8.
Details the procedure for measuring engine speed using the gauge cluster and service diagnosis.
Explains how to measure hydraulic pressure at various points using pressure gauges.
Describes how to measure cylinder operating times for boom, arm, and bucket movements.
Provides maintenance standards for attachment pins and bushings.
Detailed hydraulic circuit diagram for the SK140LC-8 model.
Explains how to access and interpret trouble history data from the mechatro controller.
Details the procedure for using the service diagnosis display function.
Explains the operation and modes of the trouble diagnosis function.
Provides step-by-step procedures for adjusting engine, pump, and unload valves.
