Koblenz B-1500 DC - User Manual

Questions and Answers

S
Stephanie ArmstrongAug 12, 2025
What to do if my Koblenz Floor Machine motor does not start?
- A
  Amanda RiversAug 12, 2025
  If the Koblenz Floor Machine motor doesn't start, check if it's properly plugged in. If the connection is okay, the line cord might be damaged and require replacement. Other potential issues include a damaged micro switch (replace it), a tripped circuit breaker (reset it), a damaged capacitor (replace it), a damaged motor line cord (replace it), a damaged motor assembly (replace it), or damaged piston and spring (replace them).
D
David CamposAug 18, 2025
Why does my Koblenz B-1500 DC Floor Machine motor work badly?
- S
  Stephanie MorganAug 18, 2025
  If your Koblenz Floor Machine motor works badly, it might be due to low voltage. Check the voltage. Another cause could be a damaged capacitor, which would need to be replaced. Also, improper motor connections could be the reason, so check the connection.
A
Anthony HudsonAug 27, 2025
What to do if Koblenz B-1500 DC motor starts, but does not run driver?
- J
  Jasmin PorterAug 27, 2025
  If the motor of your Koblenz Floor Machine starts but doesn't run the driver, the belt might be damaged and needs replacement. Alternatively, the motor pulley or the pulley axle could be damaged, requiring replacement.
C
cramirezSep 3, 2025
How to fix a noisy motor in Koblenz B-1500 DC Floor Machine?
- T
  Travis Pierce DDSSep 3, 2025
  If your Koblenz Floor Machine motor is noisy, it might be due to a damaged bearing. You should replace the bearing.