KODA SW Series - User Manual

SW SERIES
Active subwoofers
Instruction Manual
Edition 12-2020
EN

Summary

Introduction

Cleaning

Instructions for cleaning the subwoofer using a damp, soft cloth.

Specifications and Latest Manual

Information on where to find full technical specifications and the latest instruction manual.

Safety Instructions

General Warnings and Cautions

Covers critical safety alerts regarding electric shock, fire, moisture, and proper usage.

Detailed Safety Guidelines

Comprehensive list of operating and safety instructions, covering ventilation, power sources, and servicing.

Unpacking the Subwoofer

Placement Guidelines

Controls and Displays - Rear Panel

Hooking Up The Subwoofer

LFE (SUB OUT) Connection

Connecting via LFE/SUB OUT using single or Y-type RCA cables.

Stereo RCA Output Connection

Connecting via stereo RCA outputs using single or Y-type RCA cables.

3.5 mm Output Connection

Connecting via a 3.5mm line output to the PC input using a jack cable.

Speaker Output Connection

Connecting using speaker cables to the high-level inputs for audio equipment.

Operation

Volume Control

Adjusting sound volume using the Volume Regulator on the rear panel.

Crossover Adjustment

Setting the low-pass filter frequency using the Crossover Regulator.

Phase Adjustment

Integrating subwoofer bass with the system using the Phase Regulator.

Additional Information

Break-In Procedure

Recommended break-in period for internal components to reach full sonic capabilities.

Powering Down and Restart Precautions

Correct procedures for turning the subwoofer off and on to protect internal components.

Noise Floor and Power Transformer

Explains normal operational noise and potential issues with power transformers.

Kit Content

Compliance and Disposal Information

Details on product compliance with EU directives and WEEE disposal guidelines.

KODA SW Series Specifications