1. Press the power button to turn on the light.
2. Make sure the ilm is lat before feeding it through the unit.
3. Feed the ilm through the ilm input, located on the right side of the unit
when the magnifying lens is facing you.
4. When you have inished viewing the ilm, carefully guide the ilm out
through the ilm output, located on the left side of the unit.
5. When you have inished using the unit, press the power button to turn
o the light.
8. VIEWING A FILM NEGATIVE
9. CARE AND MAINTENANCE
• When storing for an extended length of time, remove the batteries from
the battery compartment and store the slide viewer in a dry place.
• Clean the magnifying lens with a soft dry cotton cloth or lens cleaning paper.
To Next Page
Loading...