13
SELECTING THE FLASH AND
INFINITY-FOCUS MODES
Besides the auto-flash mode with red-
eye reduction, you can select
auto-flash without red-eye reduction,
fill flash, off-flash, infinity-focus, and
night-view modes.
Press the FLASH-
MODE BUTTON (7)
until the desired
indicator appears
on the LCD
PANEL
(5).
The flash modes will remain selected
after you take the picture. To change
the flash-mode selection, press the
flash-mode button, or turn the camera
off then back on to return to the flash
default mode.
Red-eye reduction
Some people’s eyes (and some pets’) can
reflect flash with a red glow. This camera
features automatic flash with red-eye
reduction which is the intitial default setting
for this camera. With the help of the pop-up
flash and by following the instructions
below, you can minimize red eyes in flash
or fill-flash pictures.
1. Move the ON/OFF SWITCH (20) to the “ON”
position to turn the camera on and to
raise the FLASH (9).
2. Press the FLASH-MODE BUTTON (7)
repeatedly until the auto flash with RED-
EYE-REDUCTION INDICATOR (29) appears
on the LCD PANEL (5).
• Disregard step 2 if the default setting is
already set for red-eye reduction.
3. Frame your subject within the VIEWFINDER
EYEPIECE
(19).
4. Have your subject look directly at the
RED-EYE-REDUCTION LAMP (14).
5. Partially depress the
SHUTTER
BUTTON
(16).
When the FLASH/CAMERA-READY LAMP (18)
glows green, fully depress the shutter
button to take the picture.
To Next Page
Loading...
Need help?
General
