Page | 12 Guidelines to Install Your Baby Monitor
• Before using your Baby Unit and the Parent Unit
together, you must irst establish a radio link
between them. The range may be aected by
environmental conditions.
• Any large metal object such as refrigerator,
mirror, iling cabinet, metallic door or reinforced
concrete between the Baby Unit and the Parent
Unit may block the radio signal.
• The strength of the signal may also be reduced by
other solid structures such as walls or electrical
appliances (including radios, TVs, computers,
cordless or mobile phones, luorescent lights or
dimmer switches).
ESSENTIAL GUIDELINES FOR THE INSTALLATION OF YOUR BABY MONITOR
• The use of other 2.4 GHz products (e.g. wireless
networks [Wi-Fi routers], Bluetooth systems, or
microwave ovens) may cause interference with this
product. Therefore, always keep the Baby Monitor
at least 5 feet from such products, or turn them o
if they appear to be causing interference.
• If the signal is weak, try moving the Parent Unit and/
or the Baby Unit to another position in the room.
• The Pan-and-Tilt function of the baby unit is operate
via the App or using the Parent unit control. Do not
attempt to rotate or twist the baby unit by hand.
To Next Page
Loading...
