Kodak CHERISH C520 - Safety Instructions and Precautions; Strangulation Hazard Warning; Baby Unit Safe Placement; Battery Replacement Caution

Page | 30 Parent Unit Options
4.2.3 View Camera
1. Press the “ ” button of the Parent Unit for the
menu bar.
2. Press the “ ” button or “ ”to select
(CAMERA) icon, and press “ ” to conirm.
3. Press the “ ” button or “ ” to select (VIEW
CAMERA) icon, and press “ ” to conirm.
4. Press the “ ” button or “ ” button to select the
desired camera (Camera 1/ 2/ 3/ 4) that you want
to view, then press “ ” to view the picture from
that camera.
NOTE:
• If there is only 1 camera in the Parent Unit, you
are not allowed to remove the camera. You can
re-register the same camera using other camera
number.
• If there is no camera connected to the Parent
Monitor, you will see the warning message “Please
pair with camera.”
1. Press “
” on the Parent Unit for the menu bar.
2. Press “ ” or “ ” button to select (CAMERA)
icon , and press “ ” to proceed to the next
step.
3. Press “ ” to remove camera, then “ ” to
proceed.
4. Press the “ ” button or “ ” button to select the
camera number that you want to delete. (e.g:
) Press “ ” to conirm.
5. An alert will pop up, click “ ” to remove, and “
” to cancel, then press “ ” to conirm.
4.2.2 Delete a Camera