Kodak CHERISH C520 - Getting Started with Your Baby Monitor; Powering the Baby Unit; Powering the Parent Unit

Page | 34 Parent Unit Options
1. Press the “+” button or “-” button on the side of the
Parent Unit to select the desired volume level
(levels 05).
4.9 Volume
1. Press “ ” for the menu bar.
2. Press the “ ” or “ ” until ZOOM is
highlighted. Press “ ” to conirm.
3. Move to “ ” (ZOOM IN) or “ ” (ZOOM OUT) to
select the 1X or 2X Zoom (The default setting is 1X)
4. Press the “ ” button to save and exit.
4.8 Zoom
1. Press the “ ” button of the Parent Unit for the
menu bar.
2. Press the “ ” button or “ ” to select (LOOP
OFF) icon, and press “ ” to conirm.
3. The screen will then display images from dierent
registered cameras in a loop of cam 1 / cam 2 /
cam 3 / cam 4.
4. Press the “ ” button. Select “ ” (LOOP ON)
icon to disable Camera Loop. Press “ ” to
conirm.
4.7 Camera Loop
Prerequisite: Parent Unit needs more than one registered
camera.
1. Press “ ” on the Parent Unit for the menu bar.
2. Press “ ” or “ ” button to select
(BRIGHTNESS) ,
and press “ ” to proceed to the next step.
3. Use “ ” button or “ ” button to adjust the
brightness level of the alerts.
4. Press the “ ” button to save and exit.
4.6 Brightness